use existing wired sensors
get notifications anywhere
no additional fees
no batteries required
Use Your Existing Wires To Create A Smart Alarm System
Your home, like millions of others across the country, is pre-wired for an alarm system.
With the Konnected Alarm Panel, you can easily replace your old alarm panel or take advantage of your newly pre-wired home and create a smart alarm system.
This do-it-yourself (DIY) solution to retrofit any wired alarm system works with leading consumer smart home platforms that allow you to monitor and control your home from anywhere, without monthly fees!
Not into DIY’s? We’ve got you covered with our network of dealers!
Konnected works with most leading smart home platforms:
How the Alarm Panel Conversion Kit Works
The Konnected Alarm Panel replaces a traditional wired alarm system through your existing wired alarm sensors in five easy steps. If you wish to fit it into your newly pre-wired home, skip Step 2.
Check out these five easy steps!
CHOOSE THE ALARM PANEL CONVERSION KIT IF YOU:
- Need the most value for money Konnected panel
- Only seek Wi-Fi connectivity*
- Don’t want to pay any monthly fees and switch fully to app-based self-monitoring
- Don’t want to use the original alarm system anymore
- Want the ability to replace original keypads with touch-screen tablets**
- Have a pre-wired home without any alarm system installed yet
- *Compare with Alarm Panel Pro
REASONS TO LOVE KONNECTED FOR APP-BASED HOME MONITORING
✓Works with leading smart home platforms and voice assistants
✓Infinitely expandable by adding any of our alarm panels
✓No required monthly fees or subscriptions
✓Real-time notifications so you can monitor your home from anywhere
✓Automatically arms/disarms your home
✓Choose your favorite smart home app
✓Uses your pre-existing wired sensors and siren
✓Create smart home routines and automations
WORKS WITH MOST WIRED SENSORS & DEVICES
Breathe new life into all the sensors already wired in your home and make them visible and actionable in your smart home app.
✓Door and Window Sensors
✓Wired PIR Motion Sensors
✓Wired Glass-Break Detectors
✓Water Leak Detectors
✓Smoke and Carbon Monoxide Detectors*
✓Alarm Siren and Strobe Light
*THIS PRODUCT IS NOT A FIRE OR LIFE SAFETY DEVICE. Use with smoke and carbon monoxide detectors is for informational purposes only. Do not rely on Konnected alone to notify you in a life threatening emergency.
Konnected is infinitely expandable by simply adding more Konnected Alarm Panel boards! Our unique decentralized approach means that each Konnected Alarm Panel board works independently and has its own WiFi connection to your smart home platform. You can add any of the Konnected devices, even mix either 6-zone WiFi model or the Alarm Panel Pro, anywhere there’s a WiFi signal. The smart home app syncs everything together into one cohesive system.
6 Zones (with Add-on board)
HOW MANY ZONES DO I NEED FOR A CONVERSION KIT?
- If your home has a pre-existing traditional alarm system, the zones are likely listed by the keypad or inside of the alarm system box (the one with all the wires). Count them, and this is the minimum number of zones you'll need.
- You can separate zones for more granular visibility. For example, if your old system has a zone "Entry Doors," you can pull apart the wires for "Front Door" and "Back Door" into two zones on Konnected.
- If you're still hesitant, you can also go around the house and count every door, window, and motion sensor. Look for small round or rectangular sensors embedded in the door or window frames.
ALARM PANEL FEATURES
Micro USB port
12V power in
12V AUX power out
Siren output (Alarm Panel only)
LOOKING TO REPLACE YOUR OLD KEYPAD?
You can upgrade the look and function of your home by replacing your old alarm system keypads with wall-mounted tablets after you've converted your wired alarm system. Wall mounted Amazon Fire tablets [referral link] are a beautiful and inexpensive way to create a DIY smart home dashboard.
Prefer to keep the traditional keypads? Shop our Interface Kit that allows parallel connection with your existing system.
LOCAL AND/OR CLOUD BASED AUTOMATION
Konnected supports LAN-based local home automation or convenient & secure cloud based platforms via our free to use Konnected Cloud service. Learn more about cloud vs. local on the blog
LEADING SMART HOME INTEGRATIONS
Monitor and control smart devices and home appliances wherever you are.
Integrate your smart home monitoring with Alexa-enabled devices.
The open-source home automation platform that focuses on privacy and local control.
Compatible with popular home automation devices, may include a variety of built-in apps.
Community-oriented, native, powerful and beginner-friendly.
A universal integration platform for all things around home automation.
Control MQTT Enabled smart devices.
WHAT KONNECTED USERS ARE SAYING
802.11b/g/n 2.4 GHz
Up to 6 NC/NO sensor loop inputs
Zones 1-5 may also be used for 3.3V signal outputs
Dedicated siren/strobe switch (alarm board only)
Dedicated 3.3V signal output (add-on board only)
Works with the Konnected Alarm Panel INTERFACE module
200mA @ 12VDC max power consumption (device only)
Total power consumption varies depending on attached auxiliary powered devices and siren.
DC barrel jack connector 5.5mm outer x 2.1mm inner (center positive)
Auxiliary Power Output:
Same as input power source (12VDC)
Siren/Strobe Output (Alarm board only):
Works with most 12V alarm sirens up to 2A
Signal Output (Add-on board only):
5VDC supply (max 500mA)
3.3V output for switching a relay or piezo buzzer
Upgradable and serviceable via USB connection to a computer
1-year limited warranty
63mm L x 35mm W x 19mm H
Mounting holes: 3mm diameter (x 4)
Designed in the USA
Assembled in North America from foreign sourced components